Testing the standby current draw for the OctoPROBER. It uses a soft power switch and a real time clock which draws power when the device is turned “off”. Fortunately the power consumed is very small. At a battery voltage around 4V the standby current is under 20uA. With a 2000mAh battery we have a standby lifetime of 100000 hours or over 11 years! Don’t really have to worry about the OctoPROBER loosing its clock time anytime soon.
Tag Archives: testing
Pinheck Board REV 5 Prototypes Complete
Last week I finished the prototypes for the REV 5 Pinheck Board and shipped them to Spooky Pinball. I built 5 boards for testing to make sure this is the final revision before starting the full on production run. These will be in the machines Spooky is taking to the Midwest Gaming Classic. I will also be there encase anyone has questions about the board set.
Second prototype board I finished.
Test jigs to make sure the boards are made correctly. I am working on a better test jig for the production run that will be fully automated to help speed up the testing process.
Boards ready to ship!